By default the camera only records motion activated videos to the NAS. Configure sending of motion activated images: Go to Task , then Task Management. Configure and enable task 7 Snapshot to storage on alarm. Apply changes.
About the Author: NetCamPro. Micro SD storage included. Quickly review and export archived video with advanced playback.
Users will find the management interface intuitive and easy to use — quickly navigate live view preferences, recording schedules, and advanced playback options.
One USB port for the included mouse and one for configuration backup and firmware upgrade. Single camera and quad-view modes with variable-time auto-scan function. For each camera, manage on screen display, image settings, PTZ functionality, motion detection, privacy masks, tamper detection, and video loss.
Create weekly continuous and motion detection recording schedules for each camera with video overwrite when storage is full. The CameraFTP service setup is generally not dependent on any parameters in the System section of setup. You can quickly check this section and see if you need to configure anything. The parameters to enter are dependent on your subscription level. Please note: The Max bit-rate must be changed. The default bit rate is designed for local network only. Setting it too high will slow down your network connection and causing upload to fail.
Please also make sure your Internet connection has enough upload bandwidth. ADSL type of connection is usually too slow, you might need to set the bit rate even lower. Assuming you have enough upload bandwidth, you can set the maximum bit rate based on the bandwidth calculator. Visit www. If you ordered a plan with motion detection enabled, then you must configure motion detection with your camera. Click the "Events" tab and select Motion Detection as shown below:.
This camera can only upload image snapshots and not video clips. It is ok as CameraFTP has viewer apps that can play the recorded image snapshots just like video clips. This reduces the bandwidth usage so that the camera will be less likely slowing down your network. This is recommended. To enable Motion Detect Trigger, please see the screenshot below. The camera will keep uploading images during the scheduled time interval. It uses more storage space and bandwidth. It may also slow down your Internet connection as the camera will keep uploading images even if there are no detected activities.
You can then remove the Ethernet cable. If you use VSS for video recording, it is important to set the correct video frame rate and bit rate in Video Profile Settings.
0コメント